PNGIMG conflitcs with GraphicEX? #2
Is there any advise you could give? I don't think i'm doing anything that is not supported by WpTools
PNGIMG conflitcs with GraphicEX? #1
Hello Julian, I'm currently using WpTools 6.25.4 with the GraphicEx library on Delphi XE2. I've noticed though that PNG images are no longer loaded c…
Empty paragraphs from HTML, formatting #2
Just noticed when using the up and down arrow keys to loop through the paragraphs it still requires 2 clicks to jump to the next / previous paragraph. So it lo…
Empty paragraphs from HTML, formatting #1
Consider the following scenario: procedure TForm1.Button1Click(Sender: TObject);begin with TWpRichText.Create(Self) do begin Parent := Self; Align := AlClient;…
Format as webpage + line spacing #3
And it does that very well, but because it works so well i also can not go back anymore and that means it still needs a lot of work. If there was a way to comb…
Format as webpage + line spacing #1
Another issue when using FormatAsWebPage (see also topic: [](http://wpcubed.com/forum/viewtopic.php?t=5817)) The formatting routine does not apply linespacing …
Font size / name + HTML #8
It seems anything i try has some bad side effect... After the change it writes span styles for the empty paragraphs and includes the  . However if i l…
Font size / name + HTML #6
If an empty paragraph isn't visible (i dont see why it should not be) then setting LoadedCharAttr shouldn't matter much i suppose. Do you mean that o…
Font size / name + HTML #4
I had to change the code a little. It seems loadedCharAttr was now being set on the wrong paragraph. My new solution now also includes a CheckDivPar. I cant re…
Font size / name + HTML #3
I think i found the problem here. The LoadedCharAttr is not set inside the HTML reader. The RTF reader does set this variable. I'm not sure if this is cor…
Font size / name + HTML #2
I have changed the html writer slightly so it adds the font information for empty paragraphs: function TWPHTMLWriter.WriteParagraphStart .... {$IFDEF OBEC} if …
Font size / name + HTML #1
When reading rtf -> writing html -> loading html the font switches. WpTools seems to behave very strange at least when using styles. Or maybe i have done…
Format AsWebpage problems + sollution #7
Email has been sent to
Format AsWebpage problems + sollution #5
Julian, If interested, i can sent you my modifications to ReformatHTM. We have a lot depending on the new formatting, so i am hoping for a stable release. Any …
converting RTF -> HTML adds whitespace after each paragra #2
Any response would be appreciated. We have already flagged this as a known issue. If this is being ignored by wptools however, then for long term we will have …
TWPAttrCache doesn't seem to work anymore #1
I'm not sure if this is important, users haven't experienced any negative effects from it, but it seems flawed. When debugging i noticed the FCacheCo…
converting RTF -> HTML adds whitespace after each paragra #1
WpTools 6.13.1 lvStr := WpRichText1.AsAnsiString('HTML'); WpRichText1.AsString := lvStr; You'll notice in the document every paragraph now ends …
In TWPRichText, loading 2 x <br> tags hides text #3
Traced it back to TParagraph.Reformat The format routine skips the second <BR>, but the paint engine does not. Because the linecount is longer valid (set…
In TWPRichText, loading 2 x <br> tags hides text #2
I'm having the same issue, WPTools 6.13.1
Format AsWebpage problems + sollution #4
Found another problem when using wpFormatAsWebpage. Numbers and bullets are no longer displayed, this is because the paint engine requires the paragraphs to be…
Format AsWebpage problems + sollution #3
I can't demonstrate problem 1 with just a html file, because the problem occurs when the _OnInternPaintPar event is used for drawing. I would need to cons…
Format AsWebpage problems + sollution #1
WpTools 6.13.1 In our application we have started using the (relatively new) AsWebPage property. This could finally enable us to use wptools as a html viewer f…
Attached images are lost when converting RTF to HTML #3
I upgraded WPTools recently from 6.0.3 to 6.13.1 and today ran into what seems to be the exact same problem. The problem is that the html writer now only saves…
Behaviour change V5 to V6 (InputMergeField) #18
Hi Roy. I experienced the exact same problem you are having after having updated WpTools 5 to WpTools 6. I managed to track down the problem to the following c…
Table in mergefield, RTF Reader displaces the mergefield #4
I'm probably doing something wrong with adding 1 new paragraph, because i used this: lvRtfDataCollection.SelectBody;lvRTFDataCollection.FirstPar.AppendNew…
Table in mergefield, RTF Reader displaces the mergefield #3
I already tried adding an additional paragraph, and i'm sure this will work for the WPT format, but unfortunately we need to use the RTF Format. I have be…
Table in mergefield, RTF Reader displaces the mergefield #1
I've saved the following RTF from a TWPRichtext. The table is inserted into the mergefield using the mergetext routine. {\rtf1\ansi\deff0\uc1\ansicpg1252\…
Create HTML from RichText-content #4
Since Julian is on his vacation i have dug up this code that i wrote a long time ago. This code has not been used or maintained since, so i can't be certa…
Pagebreak in Table -> Display error@Layout Normal #11
With wpShowGridLines i can still see a line at the page break and if the table or a table row ends on the page break then the cell / table border is not visibl…
minor fix: HTML output, font size #1
Hi Julian, discoverd the following problem with code in WPIOHTML.pas: TWP_HTML_FONTSIZE = ((smin: 0; smax: 8; snumber: 1; ssize: 8), (smin: 9; smax: 10; snumbe…